Dixell XWEB 3000 Guide d'installation télécharger pdf (Page 9)

XWEB SERIES Installation Guide

04/11/2004 1592017000 Pg. 9/74

3.1 The TTL output

The instrument with RS485 on board do not need any kind of

external interface module. For instruments with external interface:

keep the TTL cable away from power cables or frequency sources.

The XJ485 external interface must be connected with TTL cable to

the instrument with TTL compatibility.

3.2 Serial address of the instruments

Each instrument must be defined by its unique address.

Check the address into the Adr parameter value. Take reference to

the instruction manual of the instrument itself to find the right

procedure to enter the programming and set the value.

The easiest way to work with the category functions is to set the

addresses progressively for similar groups of instruments which

have the same application.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 73 74

Pas de commentaire

Dixell XWEB 3000 Guide d'installation Page 9